ROXUL Safe n Silent Pro is a stone wool insulation product for use in interior wall partitions of residential wood and steel stud construction where superior fire resistance and acoustical performance are required. This non-combustible, lightweight product has excellent acoustical dampening properties and is dimensionally stable which makes it ideal for friction fit into walls, ceiling and floor applications. The product is chemically inert; therefore it will not promote corrosion.
Rockwool™ is a nature-based insulation made of volcanic stone, a safe and sustainable material that continues to perform and lasts throughout the lifetime of the building. It is designed and manufactured to achieve excellent acoustic insulation performance in all types of drywall partition configurations.
This product is designed for interior wall, ceiling and floor applications. ROCKWOOL™ Safe‘n’Silent Pro is recommended to be used for drywall partition applications in recording studios, home theaters, auditoriums, hospitals, cinemas, schools, offices, residential and industrial buildings. It may be used for metal stud partitions for easy installation, keeps its shape over time without sagging or slumping in the wall cavity.
Sealed hollow cavities in ceiling and walls act as a “drum” with an amplifying effect on noise, especially of certain wavelengths. It is very common in India to use false ceilings with empty cavity. Using Rockwool acoustic mineral wool lessens the sound energy ‘bouncing’ around inside the cavity and creates a quieter environment. This is easy to retrofit by opening the ceiling at a few points and inserting the rockwool.
- Rockwool Safe & Silent Pro 330 – 40 kg/m3
- Rockwool Safe & Silent Pro 331 – 50 kg/m3
- Rockwool Safe & Silent Pro 350 – 60 kg/m3
- Rockwool Safe & Silent Pro 370 – 80 kg/m3
- Rockwool Safe & Silent Pro 380 – 100 kg/m3
- Thickness: 50mm
- Non-combustible with a melting point of approximately 1177°C (2150°F)
- NRC is 1
- Fire resistant due to its high melting temperature
- Does not rot or promote growth of fungi or mildew
- Low moisture absorption
- Chemically inert; non-corrosive
- Water and moisture resistant; does not absorb moisture to maintain insulating value
- CFC and HCFC free, product and process
- Made from natural & recycled materials
- Approved for use in Dolby Atmos & THX certified studios, theatres & listening rooms
Simple and fast installation
No sagging/slumping within frame, rigidity lasts for a lifetime of a building
Water repellent and moisture resistant
Non-combustible and fire safe
Safe’n’Silent Pro is both water repellent and moisture resistant (tested under EN1609). The product repels water even when exposed to temporary splashing of rain water at construction site and still able to maintain its shape over time; thereby delivering maximum noise and fire protection. Moisture and nutrients are necessary conditions for fungal growth. Since more than 95% of this product is made up of inorganic fibres, there is little nutrient source to allow fungal growth. Hence, it does not cause corrosion of the metal studs nor promote fungi growth within the wall cavity.
Few insulation can take the heat like we do – with the ability to withstand temperatures of over 1000°C without melting according to DIN 4102-17. Safe’n’Silent Pro is non-combustible and achieves the highest European fire classification, A1, according to EN13501-1. This means that it can effectively impede the spread of fire and provides the critical extra minutes for occupants to escape from a room or building. With its fire retardant properties, Safe’n’Silent Pro also does not contribute to fire load within the building and complies with ASTM E84-10 to achieve Flame Spread ‘0’ and Smoke Development ‘5’ that surpass NFPA Class A requirement.
Easy to Cut
It is also simple to cut Safe’n’Silent Pro to size with a serrated knife, for a fast and easy installation between studs, around electrical boxes, pipes, wiring, ductwork and even between studs and joists of non-standard widths.
Sag free & tight fit
The very nature of stone wool makes Safe’n’Silent Pro a wise long term investment that works continuously without requiring any maintenance. The higher density material provides superior sag resistance and fit when mounted within a frame or wall cavity. It can be easily cut and trimmed for the best possible fit into the partition wall cavity, assuring there will be no gaps that may compromise the performance of the system. Safe’n’Silent Pro keeps its shape over time without sagging or slumping in the wall cavity. All these ensure a partition wall system that protects its occupants against noise and fire for the lifetime of the building.
Fast and easy installation
Safe’n’Silent Pro is fast and easy to install, helping to reduce the time taken and labour needed for installation work, hence increasing overall speed of construction. Working with Safe’n’Silent Pro is easy and can be done in 3 simple steps: