Product Description
An omnidirectional measurement microphone with an individual calibration profile. Every microphone has been measured by Sonarworks acousticians against an ANSI-certified measurement microphone. This means perfect accuracy within the audible range and freedom from sample-to-sample irregularities.
Microphone specification
- Microphone type: electret-condenser
- Transducer type: MEMS
- Frequency response: 20 Hz to 20 kHz
- Polar pattern: omni-directional
- Output impedance: 300 Ω
- Sensitivity: 14 mV/Pa
- Signal-to-noise ratio: 65 dB (A)
- Dynamic range: 106 dB
- Maximum sound level: 124 dB SPL
- Power requirements: +48V phantom power
- Connector type: 3-pin XLR
- Weight: 64 g
- Microphone clip diameter: 21 mm
What’s included
- SoundID Reference Measurement Microphone
- SoundID Reference Microphone Clip
- Individual multi-angle calibration profiles for 0°, 30°, and 90° off-axis measurements, incl. TXT format for third-party use
System requirements for SoundID Reference compatibility
- Valid license for SoundID Reference for Speakers and Headphones, or SoundID Reference for Multichannel
- macOS 11 Big Sur, 12 Monterey, 13 Ventura, 14 Sonoma
- Windows 10, 11
- Stable internet connection (offline use not supported)
- 2.0 stereo speaker system (with or without subwoofer), or a supported 2.1-9.1.6 multichannel speaker system (see supported formats here)
- XLR to XLR audio cable
- Full-height Microphone stand for multichannel system measurements
- Audio interface requirements during the speaker measurement process:
- +48v Phantom Power support
- The same audio interface must be used for input/output
- The audio interface must support and be set to one of the following sample rate formats: 44.1kHz, 48kHz, 88kHz, 96kHz, 192kHz
- The audio hardware setup must consist of a single external hardware device only (additional preamp units are supported)
Software (Add-on)
SoundID Reference software measures the frequency response of your room and speakers to create a calibration profile. For headphones – simply apply a pre-made calibration profile available in the software. With calibration applied, your music will sound great everywhere. Calibrate your headphones and speakers with SoundID Reference software to trust every mixing decision. SoundID Reference is a standalone app and a DAW plugin that calibrates speakers and headphones to deliver an accurate studio reference sound. Made for audio engineers, producers, musicians, DJs, composers, sound designers, game developers, and audiophiles.
Works in all major DAWs as a plugin and as a standalone Systemwide app calibrating audio across your entire system.
Achieve ultra-accurate monitoring — effortlessly
Calibrating your studio monitors with SoundID Reference is a piece of cake. Just connect a measurement microphone to your audio interface, fire up the software, and you’re good to go (microphone sold separately). And since it comes with more than 280 ready-to-use headphone calibration profiles, tailoring the software to your headphones is even easier. SoundID Reference’s calibration profiles create a target frequency response that’s flat across all audible frequencies. This calibration software also allows you to make custom, real-time adjustments to the target curve for profiles that are tailored to your individual application. And since you can save as many profiles as you’d like, switching between different speakers, headphones, and rooms is 100% seamless.
Overflowing with pro-level features
Sonarworks SoundID Reference is packed with an astounding number of pro-requested features. For starters, the software includes both DAW plug-in and standalone desktop application components. You get three filter modes: zero latency, mixed, and linear phase, along with extra DSP processing controls, including mono, dry/wet, and safe headroom. SoundID Reference’s Translation Check feature alone is worth the software’s price of admission, enabling you to audition your mixes on more than 20 different simulated devices. The SoundID Reference application includes MIDI mapping for various parameters, as well as user presets for switching between predefined output devices/channel pair combinations.
Sonarworks SoundID Reference Software Features:
- Calibrates your speakers and headphones to ensure consistent, accurate monitoring
- Delivers a ruler-flat response across all audible frequencies
- Speaker calibration process typically takes less than 20 minutes (calibration microphone sold separately)
- 280 ready-to-use headphone profiles for instant headphones calibration
- Permits you to make custom, on-the-fly curve adjustments to your profiles
- Save unlimited profiles for seamlessly moving between different speakers, headphones, and rooms
- Audition your mixes on more than 20 different simulated devices without leaving your workstation
- 3 filter modes: zero latency, mixed, and linear phase
- Extra DSP processing controls: mono, dry/wet, and safe headroom
- MIDI mapping for various parameters
- User presets for switching between predefined output devices/channel pair combinations
- Includes both DAW plug-in and standalone desktop application components
Aural Exchange is Asias leading exporter of Sonarworks SoundID Reference Microphone to top importers and distributors worldwide. With a strong export presence in Brazil, France, Germany, Italy, the Netherlands, Oman, Portugal, Saudi Arabia, South Africa, Thailand, the United Arab Emirates, the United Kingdom, the United States, Sri Lanka, Vietnam and Qatar, as well as major import markets such as China, India, Australia, Mexico, and Canada, Aural Exchange has built a solid reputation for reliability and consistency. Backed by consistent monthly production capacity, supported by a strategic factory network across South Asia, we ensure fast, efficient, and cost-effective deliveries to our global partners. Known for quality, innovation, and dependable service, Aural Exchange is the trusted choice for buyers seeking to import Sonarworks SoundID Reference Microphone for acoustic, commercial and industrial applications.
What others are saying
There are no contributions yet.